After the success of milking my own PCB for the DIY exup eliminator I decided I needed a new CNC machine with a larger work area and more precision.
This is my Arduino controlled exup eliminator that will fool the Yamaha R1 ECU into thinking the exup valve is still connected thus preventing error code 17 on appearing on the gauge.
How it works
It has been a lot of work getting to this point. Lots of wires have been stripped out of the loom and modifications made so it can be run in the mini.
The video says it all. It lives!!!!
The fault codes are expected. I don't have an exup, air or water temp sensor connected to the loom.
With the wiring loom modifications mostly complete it was time to offer it up to the engine and get it all the major components hooked up. The plan is to connect it to a battery so I can power up and check everything out and keep an eye on the fault codes if any appear.